Back together yet?
Follow along with the video below to see how to install our site as a web app on your home screen.
Note: This feature currently requires accessing the site using the built-in Safari browser.
Yes, a bit too low at the rear. Right now the rear springs are the salvaged ones from Pick-N-Pull and were broken so have one coil cut. I made the rear spring perches shim-able so I can add more shim and pump up the Air-Lift bags. But I'll get a pair of new springs that will also lift it. As more weight is added the rear definitely needs to be lifted.Sits low ! !
I'm hoping for about 250 to 300 at the flywheel or 225 to 250 on the chassis dyno. It's basically stock with just the turbos added for more power. I don't expect to go over 10 psi boost, so we'll see. My friend has a chassis dyno, so i"ll have a chance to test it and he can fine tune it.What kind of power do you think that engine will make ?
Yes, certainly cooling could be an issue. Currently it has a 16" electric fan that came with the radiator as a kit. I could go to an 18" fan if needed and I could add small pusher fans in front. As a last resort, do away with the intercooler and use alcohol injection to cool the charge.John. Very innovative I hope it all works ok especially cooling issues.