width of a '26 / '27 T

[bullet]

What is the interior width ( to fit seats ) in a '26 / '27 T coupe.
Looking to stock pile pieces for a future project.

 

[Old Fart]

IMHO:

A 60's Vauxhall front seat should fit.

Its a bench seat with NOT alot of paddiing though...

 

[bullet]

I suppose then a '72 Dart/Duster/Demon split bench would be too wide ?

 

[slim]

The bare spring assemble on a 32/3/4 p/u is 45" wide at the front 40" at the back 19" deep at the top and 16" at the bottom this should be similar to the T I think most people are useing rear seats or the short middle row from a van . should give you a starting point till someone else jumps in.roadster dimention

www.jalopyjournal.com/forum/attachment.php?attachmentid=348170&d=1188322607

 

[bullet]

Thanks that will help when I find a bench I like.

 

[shane2290]

Hey there Bullet ,

I used backseat out of a 96 jeep TJ ---fit in nice --seems to me was around 44inches -flips forward and up can get accurate measure if you like?

Cheers Shane

 

[chimp koose]

digging up an old thread , but I used a caravan ('92?)middle seat in my 26 coupe . It just fits . I made mine into a fold forward bench with hardware from a wider folding caravan bench seat

 

[Jdcbdab]

digging up an old thread , but I used a caravan ('92?)middle seat in my 26 coupe . It just fits . I made mine into a fold forward bench with hardware from a wider folding caravan bench seat

I too used a middle seat from a dodge caravan 2004 if I remember correctl.