1990 8.8 T-Bird supercoupe IRS complete

[juice03]

http://i206.photobucket.com/albums/bb167/smalltown_bucket/IMG_0833.jpg
Hey I Have a 8.8 independent rear suspension from a 1990 T-Bird Supercoupe, it has around 130k on it, it is complete even with the rear springs and a driveshaft. measurement from disc to disc is rougly 63". Located just outside of Leduc Alberta. $500 FIRM Ph# 780-970-7361 (mike)

[59chevylowrider]

hey juice its rick here i dont need that irs right now but keep me in mind. im looking for a new build and that rear might be nice depending on what i find
rick

[juice03]

No problem, I just have it sitting up on the rack out of the way. Starting a collection of IRS's, also have a jag rearend but that one's not for sale :p. There are about 15 different rearends here 10 bolts(7.5 and 8.5), 12 bolts, 9", 8.8's I have alot of parts. :D

[Kustomshoebox]

I see in your signature that your car collection is getting smaller... is that true?

[juice03]

I see in your signature that your car collection is getting smaller... is that true?

Not sure if it's getting smaller but some stuff is up for sale. Actually I think it's getting larger come to think of it :D Here is the list of whats sitting here right now

1950 Chevy Torpedo 2dr
1950 Pontiac Torpedo 2dr
1952 Chevy Deluxe coupe ( my summer driver )
1941 Dodge Coupe
1941 Dodge 4dr parts car
1950 Chevy 1/2t tuck
1976 Austin Mini
2003 Harley Truck
2000 Corvette coupe ( just bought it )
1998 Ford F-150 ( parts truck )
1997 Chevy blazer (parts truck)
1996 Chvey S10 (parts truck)
1988 Jaguar ( complete but bought it for the rearend )
1995 Chevy Blazer (parts truck)
2001 Chevy 2dr Blazer ( parts truck/ project ?? )
1993 Cadillac Fleetwood
2006 Dodge 2500 Deisel ( daily driver )
2001 Ford F-250 ( my parts/car tow vehicle )

So is that enough vehicles for 1 guy, and yep it's all here in my yard. Good thing i had 2 shops and 5 acres.

[juice03]

If I sell one I'm bad for buying two more to replace it, bad addiction to cars and tools. KMS is going to see alot of me in the new year. Shop is pretty much done now and have to start buying the bigger and better tools.

[Kustomshoebox]

shops almost done and we havent gotten pictures since you were working on the foundation? LOL well good on ya I guess... KMS should have a parking spot out front labeled just for you "juice parking only - all others will be JUICED!"

[juice03]

shops almost done and we havent gotten pictures since you were working on the foundation? LOL well good on ya I guess... KMS should have a parking spot out front labeled just for you "juice parking only - all others will be JUICED!"


Sorry about that, I thought I posted some recent pictures of the shop. Outside was done about a month and half ago, and I just finished all the walls on the inside about 2 weeks ago, now i'm just finishing the last of the benchs. JAN 1 was my deadline to start building some vehicles in there and I'm going to make it. :D
Here is the outside:
http://i206.photobucket.com/albums/bb167/smalltown_bucket/IMG_0492.jpg
http://i206.photobucket.com/albums/bb167/smalltown_bucket/DSC018471.jpg

[juice03]

O ya btw, our KMS TOOLS is open in Edmonton. WHAT A JOKE THAT LOCATION IS !!! Showed up there, to a pretty much empty hole in the wall. The guys there say that you have to tell them what you want and they'll bring it in from the Red Deer branch, why even open the doors I thought. For the 50 min drive I'll just go to the Red Deer location, but I still have to call ahead to make sure they have stock. But there always good for bringing in what i want.

[Kustomshoebox]

Your pretty good at making your dead lines... you should give us a course on how you do it! I've seen a few deadlines come and go ...

[juice03]

I think the tightest deadline was building my 52 last summer and it was right to the last day. But she was on the road when I said it would be :D Now the trans is coming out to be replaced with a T5 so I can get a bit better top end with lower RPM's. This s/b is screamin at 140km's, I know I could change rear gears but why not put in the 5 sp with a real long shifter. The Foose wheels are coming off for steelies or caps and the ares is coming down a couple inches. All in a weeks work :p , almost ready to start that changeover. I just have to quit buyin cars and get the ones i have, done :D

[CDNflatlander]

Up yers Mike!!:D
Deadlines are like rules, meant to be broken!
Lots of projects Juice, More the merrier...unless given a few away:eek:
Cheers,
Greg

[juice03]

Up yers Mike!!:D
Deadlines are like rules, meant to be broken!
Lots of projects Juice, More the merrier...unless given a few away:eek:
Cheers,
Greg

I think thats why I went through a devorce in the last year, rules are meant to be broken LMAO :p

[Kustomshoebox]

I wasn't pointing fingers in your direction Greg :D we all know that there is no definate deadline on your stuff...

FORWARNING: if a certain touring hasn't changed by the anual spring swap meeting in Gregs shop... I here by solomly vow to lift the body a turn it 180 degrees on the chassis while greg is in the outhouse